If you are looking to buy any kind of vehicle, whether it is a car, truck, or a piece of farm equipment like a tractor, one of the things that a lot of people do not think about checking into is whether or not it has been flooded before. Even if a vehicle has been flooded, a record of the flood may not be obtainable from a vehicle history report. If the owner of the car did not report the flooding of the vehicle to the insurance company, then it will not appear on a vehicle history report, such as one obtainable from Carfax.com. There are, however, other ways to check to see if the vehicle you are considering buying is water damaged. It is not as difficult as it might seem to detect whether a vehicle has been water damaged or not, although if you do not know what to look for, you can be duped in a New York minute. How can you tell if a car has been water damaged? Here are a few tips.
The first thing that you should do is check and see if there are any signs of rust in the trunk, dashboard, glove compartment, and under the seats. Check also for silt and mud. These are dead giveaways that the car has been flooded.
Also take a good look at the upholstery in the car. If it does not appear to match the interior or if it fits loosely, then it might be a replacement for the original material that was in the car.
Open the car door and put your head inside and inhale deeply. There should not be a musty odor in the vehicle and you should also not smell any air fresheners. Air fresheners are usually used by car dealers and individuals who have something to hide.
Test all the electronic components of the vehicle and make sure that they work. The turn signals, heater, windshield wipers, and etcetera should be checked several times to insure that they work correctly and are reliable.
Check underneath the dashboard and move some of the wires back and forth. Bend them. If they have been wet before they will be brittle and will probably crack as you flex them.
Last, but not least, have a mechanic that you trust do an inspection of the car. Always do this before you purchase any used vehicle to make sure that there is nothing wrong with the car that the owner did not tell you about.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
Friday, October 12, 2007
Taking Care of a Fireplace
Lots of people have fireplaces in their homes, but keeping them clean and smoke free takes some maintenance and effort on the part of the homeowner. The fireplace will not maintain itself, even though there are some fireplace cleaning logs on the market these days. These will not completely replace a professional cleaning, though, so you should have one of these done at least every year or two.
You should also have the proper tools stored next to your fireplace and these are available in many different materials and types. Cast iron is a good and durable material, but fireplace tools are also available in brass, pewter, nickel, and etcetera. There is a large selection on the market and you will surely be able to find what you are looking for.
A fireplace blower can help build up the fire and add more heat to it. You have probably seen one of these before and it can be a real help when first starting to build a fire.
Fireplace tongs can be used to move around logs that are obviously too hot to pick up with your hands and this is necessary, since the logs will not always be exactly where you need them to be to get the most heat and longevity out of the fire.
A fireplace poker can be used to stir around coals and spread them so that the heat is more evenly distributed. This helps larger logs catch on fire faster than they normally would.
A shovel is used to clean out the ashes that are left after a fire is out and a small broom is necessary to keep the area immediately outside the fireplace cleaned up.
If you are having problems building a fire that does not spill smoke back into the room, you need to make sure that nothing is blocking the chimney on top of the house. Leaves, bird nests, and sticks can clog it up during the spring, summer, and fall and make it completely unusable.
Using the correct wood is also important; logs that are freshly cut and have a lot of moisture still in them will smoke instead of catch fire. Use logs that are dried out and try to store them in a place where they will not get wet.
Start the fire slowly by building it up with paper and small sticks at first to get the chimney warm. Warming up the chimney is important so that the air inside it becomes warm instead of cold. Cold air pushes the warm air and smoke down and back into the house.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
You should also have the proper tools stored next to your fireplace and these are available in many different materials and types. Cast iron is a good and durable material, but fireplace tools are also available in brass, pewter, nickel, and etcetera. There is a large selection on the market and you will surely be able to find what you are looking for.
A fireplace blower can help build up the fire and add more heat to it. You have probably seen one of these before and it can be a real help when first starting to build a fire.
Fireplace tongs can be used to move around logs that are obviously too hot to pick up with your hands and this is necessary, since the logs will not always be exactly where you need them to be to get the most heat and longevity out of the fire.
A fireplace poker can be used to stir around coals and spread them so that the heat is more evenly distributed. This helps larger logs catch on fire faster than they normally would.
A shovel is used to clean out the ashes that are left after a fire is out and a small broom is necessary to keep the area immediately outside the fireplace cleaned up.
If you are having problems building a fire that does not spill smoke back into the room, you need to make sure that nothing is blocking the chimney on top of the house. Leaves, bird nests, and sticks can clog it up during the spring, summer, and fall and make it completely unusable.
Using the correct wood is also important; logs that are freshly cut and have a lot of moisture still in them will smoke instead of catch fire. Use logs that are dried out and try to store them in a place where they will not get wet.
Start the fire slowly by building it up with paper and small sticks at first to get the chimney warm. Warming up the chimney is important so that the air inside it becomes warm instead of cold. Cold air pushes the warm air and smoke down and back into the house.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Subscribe to:
Posts (Atom)
